ULTRA is an Oxidized modified bituminous Waterproofing membrane, reinforced with high-quality
non-woven Polyester mat. ULTRA is manufactured from a high-performance membrane produced
with an Oxidized bitumen compound, then coated onto a dimensionally stable POLYESTER mat reinforcement,
and the surface on both sides is thermos-fusible plastic film.

CHARACTERISTICS:
* Excellent bonding to the surface, especially vertical application
* Easy to apply.
* Excellent resistance to salts and water-prone chemicals.
* Accommodate structural movements.
* 10-year warranty for the product

USES:
ULTRA membrane is ideal for a wide range of waterproofing applications,
Such as damp proofing, Roofs, basements, tunnels, and car parks.

APPLICATION TOOLS:
Measuring tape, marking string, gloves, goggles, gas torch, knife, trowel.

APPLICATION:
The concrete surface should be cleaned thoroughly of all contaminants like dust, traces, and oils then apply DADCO
PRIMER D-41 on the surface by brush or roller, and allow it to dry to promote the adhesion between the membrane and
surface. The rolls should be alignment correctly with an overlap of at least 10 cm from both sides, by using the gas
torch, bond the sides of the roll by heating the overlap enough to obtain a high and excellent waterproofed surface.

RULE OF APPLICATION:
After application, ULTRA OXIDO membrane Sheets
should Not be permanently exposed to sunlight.
GENERAL DATA:
Roll length: 10 meters – Roll width: 1 meter
Roll thickness: 4 mm – Reinforcement: Polyester

PACKING AND STORAGE:
ULTRA OXIDO: Is produced in rolls of size 1 × 10 meters.
The rolls are palletized and shrink-wrapped. Always
keep rolls vertically, and Pallets should not be
stacked on top of each other. Rolls should be stored
in a Shaded area to avoid direct exposure to sunlight.

HEALTH AND SAFETY:
All safety measures should be taken during the
application. Fire extinguishers should be available at the
site. Workers should wear protective tools during the
application.